User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
- If no other notifications remain in the list, the
icon will be removed
The user can manually turn off the display of the VMWI icon, by a long press of '5', whilst viewing CID
list. This will delete all VMWI items in CID list and turn off the icon in ALL HANDSETS
The user can manually remove VMWI notifications from the CID list using the delete function.
2.12 Incoming SMS Mode
Refer to Incoming SMS
2.13 Message Mode
Refer to SMS
2.14 Answer Machine Mode
Refer to Massage Play
Refer to TAM Settings
Refer to Answer machine features
2.15 Busy mode
When one Handset is TALK, another handset’s “EXT” icon, and TONE_BUSY in earpiece if press
KEY_HOOK
2.16 Power down
Make a long press on KEY_R/POWER, and the handset power down.
Press and hold KEY_R/POWER for 5 seconds to wake it up.
When the handset wakes up, the clock time data shall be transferred from base.
22 of 83