User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
3 Call User interface
3.1 Incoming call
Display
The display shows "CALL" and EXT icon blinks (0.5 s ON/OFF), if caller ID information is available
(see 3.5), caller name or number is displayed.
Both the Talk indication LED and key backlight shall be flashed during ringing. (0.25 s ON/OFF)
And LCD backlight shall be turned on.
Handset and base ringer melody and level as MENU setting.
Note 2: It is possible to change ring volume during the incoming alert by using KEY_UP/CLIP and
KEY_DOWN/CLIP keys.
The ring volume will be displayed as “VOLUME n” (1<=n<=5) or “VOL OFF” during 8 s unless
KEY_HOOK is pressed.
Incoming alert phase:
The incoming call phase begins with the first ring (ALERT_ON) signal of the handset and stops:
• If the user take the call (see operation)
• If the call is not answered and the caller release its call or another parallel phone answers.
EXT icon and LEDs will stop flashing after FTXX_LINE_EXPIRY.
The Base ring alert is synchronized with the PSTN ring ON/OFF pattern.
RPAS disable:
If the first ring period is less than the RPAS length value which is define by EEPROM, the unit shall not
emit the ring alert sound. The default setting shall be defined by EEPROM setting.
Note: the function of RPAS setting menu will be enabled, if DECT 10 handset registers to the DECT
20 base.
3.1.1 To answer the call:
Press KEY_HOOK.
Simply lift the handset from the cradle.
HOOK_IND icon will be displayed.
Note 1: After it goes to talk mode automatically, KEY_HOOK will be disabled about 3 seconds to
prevent unwanted hang up.
Note 2: Once handset TALK on, another handset’s display “EXT” icon and can not TALK &
TONE_BUSY in earpiece if press KEY_HOOK
3.2 External outgoing call
3.2.1 Normal dialling:
• Press KEY_HOOK
• Enter the called number
3.2.2 Pre-dialling:
Pre-dialling allows you to enter and modify a number before dialling.
• Dial your called number. Up to 32 digits (included pause, *,#)are allowed. If the number
exceeds 12 digits, the last 12 digits are displayed and LEFT_ARROW is ON, Press
KEY_CLEAR key to delete last digit.
• Press
KEY_HOOK, the digits are dialled, digit(s)
3.2.3 Dialling PAUSE
Press KEY_LNR (after first key) to make a pause, which is displayed as a "P".
23 of 83