User's Manual

If the internal correspondent does not pick-up, press KEY_INT again to reconnect to the external caller
on line.
3.7 Conference call between two handset and external caller
When you wish to talk an external call and other handset:
• During a call, press KEY_INT
• Select the number of the internal correspondent that you wish to call; the external caller is put
on hold.
• When the internal correspondent picks up, you can talk with internal correspondent first with
external call on hold.
• Press KEY_# to go to Conference call.
• When one of handset press KEY_HOOK or press KEY_INT. Then the conference call is
finished, but other handset still talk with external caller.
If the internal correspondent does not pick-up, press KEY_INT again to reconnect to the external caller
on line.
3.8 Caller ID (CLIP) features
3.8.1 General features
The phone supports CLIP DTMF and FSK type I and II. See 8.1 for more details.
3.8.2 Caller ID display
Note: Caller identification is only available if you have subscribed to this service with your network
operator.
The CID is decoding and display is subject to the following restrictions
1) We can receive max 50 name chars but display only first 12. CID with more than 50 name chars will not be decoded.
2) We can receive max 60 number digits but display only last 20. CID with more than 60
number digits will not be decoded.
3) We also have a max total length for CID data of 75 bytes, e.g. name length 40 and number
length 40 will not be decoded
During the incoming alert:
The CLIP information is displayed if they are provided.
Order of display:
• Phonebook name and calling number alternately if the number matches with the CLIP calling
number. Frequency of flash is 0.5 seconds NAME, 0.5 seconds NUMBER
• CLIP calling name and calling number alternately if the network is transmitted. However, if the
number is match with one of phonebook memorized number, it shall use phonebook
memorized name.
• “CALLBACK” and calling number alternately if a call is received as a response to “Recall on
Busy”. Note that Phonebook matching will not occur in this case.
• CLIP calling number
• Number matching method is as follows.
- If the one of number which CLIP or phonebook is less than 5 digits, it will not
compare. (If the one of phonebook number is 1234, this number will not use for
number matching)
- If the CLID received 10 digits and phonebook number is 8 digits, CLID last 8 digits will
use for the matching with that phonebook number. And if the CLID is 8 digits and
phonebook number is 10 digits, Phonebook number last 8 digits will use for the
matching with that CLID number.
27 of 83