User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
If se ct “
OGM wil
After selected by KEY_Menu/OK, the unit shall return to idle with S_beep.
4.3. R
A user. The memo shall
be recorded through the handset microphone.
• After press KEY_Menu/OK, then the unit announce “Please speak after the tone, to end
recording press #”. Then start to record a memo.
• Press KEY_# or KEY_CLEAR to end recording.
T apacity and this shall only occupy the memory
spa
ri
res
em e procedure for incoming message play.
.3.4 utgoing message
The pro
A&R Hello, your call cannot be taken at the moment so please leave your message after the tone.
ot be taken at the moment and you cannot leave a message, so please call
Under the “O .
• Pla
• Re
• De
ressing KEY_Menu/OK will cause the handset to show the currently selected OGM for
recording/checking and deleting (Answer and record or Answer only).
nd Record” or “Answer Only” by using “Answer mode” setting.
Recor
• u (Answer and Record or Answer Only),
pre
eco ng beep.
Onc arted, the previous user OGM cannot be retrieved.
• During recording, the LCD shall flash “RECORDING”.
until KEY_# or KEY_CLEAR is pressed, the maximum OGM length is
reached, or the memory capacity is full. The unit terminates recording with a long beep. If an
d progress the call as normal. Any OGM already
le Answer only” and then KEY_Menu/OK, the unit will be answer only mode and “Answer only”
l be selected.
3 ecord Memo
personal memo may be recorded and left as a message for another
• Select "Record Memo" from menu and then press KEY_Menu/OK.
• After press #, the unit shall return to idle.
he memo may be any length up to memory c
ce needed for the recording.
Du ng recording, the LCD shall flash “RECORDING” and recording continues until the # button is
p sed or the maximum message length is reached.
os are played back using thM
4 O
duct shall be supplied with two pre-recorded announcements.
AO Hello, your call cann
later
GM SETTING” menu, there are following menus
y outgoing message (PLAY OGM)
cord outgoing message (REC OGM)
lete outgoing message (DEL OGM)
P
• Select “Answer A
d Outgoing message
Under the selected Record outgoing message men
ssing KEY_Menu/OK causing the unit announces, “Please speak after the tone. To end
r rding, press #”. The user is then informed that recording can commence by a lo
e recording has st
• Recording continues
incoming call is received during recording, the recording will be interrupted: the product will
present the incoming call screens an
recorded will be retained.
43 of 83