User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
• At the end of recording, the unit shall play recorded outgoing massage through the handset
receiver for checking.
The outgoing message may be checked by
ay outgoing message menu (Answer and Record or Answer Only),
•
hecking an OGM does NOT select it as the current OGM to be played to line
menu (Answer and Record or Answer Only),
pressing KEY_Menu/OK causing the unit to delete recorded outgoing message and play the
• Press KEY_Menu/OK can be used to stop the outgoing message play.
M menu.
(if being
tone will be heard, then start to play default outgoing message.
4.3.5 D
•
The han ys the g.
• Select the desired day by pres or KEY_DOWN then press KEY_Menu/OK.
.6 Answer Dela
• Select "Answer Delay" from TAM Settings menu the ress KEY_Menu/OK.
• The han t LCD displays the rrent setting.
• Select the desired answer delay by press KEY_UP or KEY_DOWN then press
KEY_Menu/OK.
4.3.7 S
A cu
only
T ia
th idle.
• Under the selected Pl
pressing KEY_Menu/OK causing the unit to play outgoing massage.
Press KEY_Menu/OK can be used to stop the outgoing message play.
Note that recording/c
when the answering machine takes a call. (See Answer mode setting).
The outgoing message may be deleted by
• Under the selected Delete outgoing message
default outgoing massage.
It can be deleted the outgoing message during playing the OGM under PLAY OG
During playing OGM, press KEY_CLEAR, The outgoing message play will stop
playing) and a beep
ay Setting
Select "Day Setting" from TAM Settings menu.
• dset LCD displa current settin
s KEY_UP
4.3 y
n p
dse cu
ecurity Code (PIN)
stomer programmable 3 digit PIN protects entry to the remote interrogation feature. It can
be changed via the handset menu.
he product shall be supplied with a factory set PIN of 000. The code can only be changed v
e handset menu when the unit is
44 of 83