User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
4.4.1.2 ELETE
4.4.1.3 ORWAR
Enter the number to which to send the message
• KEY_MEM/EXIT will enter the phonebook
odify & validate the number to which to send the message
ess KEY_OK to confirm
essage sent will be saved.
nd the message, a “SEND FAIL” will be displayed and
the option to re-try.
•
.4.1.4 DETAILS
•
d.
N/CLIP keys.
•
BOX”
ss
crolls down in date/time order, more recent messages at the top.
Messages which have been read will have a space character in front of the first
digit
KEY_HASH can be used to display the additional digits.
• Press KEY_OK when you find the message required
• The text message will then be displayed. Note only the text string will be displayed,
no details.
CLIP
KEY_OK will display further options.
o return to upper menu.
Move through the options with the KEY_UP/CLIP and KEY_DOWN/CLIP keys.
essage.
4.4.3 WRITE
• Select “WRITE”
D
• Select “DELETE”
• Press KEY_OK to confirm
F D
• Select “FORWARD”
• Original message text will be displayed, edit cursor should be placed at the end of
the message. Modify the text message and validate.
Press KEY_OK to confirm •
•
• M
• Pr
• Note last m
• On failure to successfully se
the user presented with
4
Select “DETAILS”
• The CID of the sender will be displaye
• The date and time of the call will be displayed.
• Move through the information with the KEY_UP/CLIP and KEY_DOW
Press KEY_OK or KEY_CLEAR to exit
4.4.2 INBOX
• Select “IN
• Note, only ‘public’ messages, not associated with any HS or specific sub-addre
will be displayed in the INBOX
• Move through the list of messages with the KEY_UP/CLIP and KEY_DOWN/CLIP
keys. The list s
• The CID of the sender will be displayed
• Messages which have not been read will have an * in front of the first digit
•
• If the CID number is greater than 11 digits, the X icon will be displayed..
• Move through the message text with the KEY_UP/CLIP and KEY_DOWN/
keys.
• Press
•
•
Press KEY_CLEAR t
•
Press KEY_CLEAR to return to text m
47 of 83