User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
• e text will be display
• message and validate
• the message
• M/EXIT will enter the phonebook
e
•
• nt will be saved.
ge, a L” will be displayed and
th
4.4.4 Delete
Select
• Select
• Press KEY_OK to confirm.
• Select “SMS Settings”
.4.5.1 . NETWORK TYPE (Hidden in the EEPROM)
rk supports sub-addressing. A ‘Network type’
parameter will be stored for each of RECEIVE 1 and RECEIVE 2, SEND 1 and SEND 2.
that no
ub-address is present, and only the DMI is appended to the receive centre.
Wh th NTRE number will be interpreted assuming both
SA and DMI are appended.
no interp n of the SEND CENTRE number will assume that
umbe ould be sent according to the SEND MODE
rameter setting
er will be
.4.5.2 SMS Timers (Hidden in the EEPROM)
Parameter Description of Function Range of values
Default
Note that last sent messag ed
Enter the text
• Press KEY_OK to confirm
Enter the number to which to send
KEY_ME
• Modify & validate the number to which to send
Press KEY_OK to confirm
Note last message se
the messag
• On failure to successfully send the messa
e user presented with the option to re-try.
“SEND FAI
All
“DELETE ALL”
“INBOX” or “PERSONAL SMS”
•
4.4.5 SMS Settings
4
The type of the network determines whether the netwo
When this value is set (i.e 1), the interpretation of the RECEIVE CENTRE number will assume
s
en e value is not set (i.e. 0), the RECEIVE CE
When this value is set (i.e 1), the interpretation of the SEND CENTRE number will assume that no
sub-address should be appending on SEND number. Note that this parameter will over-ride the SEND
MODE parameter setting
When this value is
sub-addressing is in u
t set (i.e 0), the
se, and that the n
retatio
r sh
pa
For each of RECEIVE 1, RECEIVE
0.
2, SEND 1 and SEND2, the default value for this paramet
4
A number of new EEPROM parameters will be available to adjust SMS Timing parameters as
described below.
Validity Length of tim
Period message existence in the SC memory before
delivery to the recipient has been carried out.
minutes intervals up to 12 hours)
144 to 167 12 hours + ((VP -143)
e the SC shall guarantee the 0 to 143 (VP + 1) x 5 minutes (i.e. 5
x
30 minutes)
168 to 196 (VP – 166) x 1 day
197 to 255 (VP – 192) x 1 week
7 days
48 of 83