User's Manual
Table Of Contents
- Feature List
- Features of SunCorp GAP DECT
- Main User interface
- Call User interface
- MENU Settings
- MESSAGE PLAY
- PHONEBOOK
- TAM SETTING
- SMS
- SETUP
- HANDSET
- REGISTER
- Answer machine features
- Base description
- Base unit operation
- Call answering and message recording
- Memory full
- Message playback
- Remote interrogation.
- Technical requirement
- Default setting data
- Setting for countries variance and type of product
- BPR detection (Branch Phone Detection)
- CPC (ECS) detection (End of call signal)
- Silence detection
- Tone detection
- DTMF detection
- AGC for recording
- Audio out put level setting
- Supervisory tone
- Tail cut
- Ring signal detection
- LED flashing
- Data storage
- Prefix dialling
- Quick default settings
- Subscribe a new handset
- Test modes
- Specifications
(Z is to define that caller hung up the phone without answer the call)
“X” and “Y” are defined by EEPROM setting.
X= 200ms - 800ms (10ms step or less)
Y= 200ms - 2000ms (10ms step or less)
Z= 3s - 10s (0.5s step or less)
5.7.13 LED flashing
LED flashing speed shall be as follows.
• Flashing fast ----------- 0.5s ON/OFF
• Flashing slow ---------- 1.75s / 0.25s alternatively
5.7.14 Data storage
The recorded data, voice prompt data and voice prompt combination table shall be stored to the data
Flash memory.
The product will be for any countries and therefore the voice prompt language will be different.
77 of 83