User's Manual

34
7. Clock & Alarm
If you have subscribed to your network’s Caller ID service, the base automatically
sets the date and time of all handsets when you receive the rst call. You can also
manually set the time on the individual handsets.
7.1 Set the date and time
1. Press Menu , scroll to Clock & Alarm and press Select .
2.
Date & Time is highlighted. Press Select .
3. Enter the date using the format DD/MM/YY e.g. 04/08/12 for 4 August 2012
and press
Save .
4. Enter the time (HH:MM) and press
Save .
If the current time format setting is 12 hour, select
am or pm .
5. Press
to return to standby.
NOTE
The date and time is retained during a power failure or when the batteries are
discharged.
7.2 Set the alarm
When the alarm is set, the display shows . Each handset can have a different
alarm setting.
1. Press
Menu , scroll to Clock & Alarm and press Select .
2. Scroll
to Alarm and press Select .
3. Scroll
or to Off or On and press Select .
If Alarm is set to
On :
Scroll
or to Once , Mon - Fri or On Daily then press Select .
Enter the time (HH:MM) and press
Save .
If the current time format setting is 12 hour, scroll
or to select
am or pm .
4. Press
to return to standby.
NOTES
If the alarm is set to
Once , will disappear from the screen after the alarm has
sounded once.
If the alarm is set to
On Daily or Mon - Fri , will remain on the screen after the alarm
has sounded.
When the alarm goes off, press any key to stop the ring.
Clock & Alarm