User's Manual
40
4. Scroll or to
Recall 1
or
Recall 2
and press
Select
.
5. Press
to return to standby.
9.4 Change the System PIN
The System PIN is required when changing certain settings and for registration
/ de-registration. The default setting is 0000. You can change this to your own
preferred number (up to 8 digits).
When you enter a PIN, the digits are shown as
****
.
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll
to
Set Base
and press
Select
.
3. Scroll
to
System PIN
and press
Select
.
4. Enter the old PIN (Default setting = 0000) and press
OK
.
5. Enter the new PIN and press
OK
.
6. Re-enter the new PIN and press
OK
.
7. Press
to return to standby.
NOTE
It is advisable to make a note of your new PIN code and keep it
somewhere safe.
9.5 Restore default settings
You can restore the Colombo to its default (original) settings. Resetting the
Colombo will not affect the phonebook or Calls list, and all handsets registered to
the base will be retained. Only the handset and base settings will be reset.
1. Press
Menu
, scroll to
Setting
s and press
Select
.
2. Scroll
to
Set Base
and press
Select
.
3. Scroll
to
Master Reset
and press
Select
.
4. Select
Yes
to conrm or
No
to cancel.
5. Enter the System PIN (Default setting = 0000) then press
OK
. The display will
show
Reset Complete
and the unit will restart automatically.
Base settings