User's Manual

Pairing Instruction
1. Press 1.5 seconds, the keyboard turns on, green light will be on for 3
seconds.
2. Press the “Fn + ” keys together to enter pairing mode.
The blue Bluetooth indicator will start to rapidly flash.
3. Go to your “Settings” screen on your tablet with Bluetooth –enabled device,
activate its Bluetooth function and search for the keyboard device.
4. “Bluetooth 3.0 Keyboard” should appear.
5. Select “Bluetooth 3.0 Keyboard” on your tablet and the keyboard will now be
paired. The Bluetooth indicator will be off.
SPECIAL NOTE:
1. Please get it charged before first usage.
2. Only one device can be actively paired at one time.
3. After pairing for the first time, your tablet will connect to the keyboard
automatically when opening the keyboard.
4. In case of connect failure, delete the pairing record from your tablet, and try
the above procedures again.
Power Saving Mode
The keyboard will enter sleep mode when idle for 30 minutes. To re-activate it,
press any key and wait for 3 seconds.
Charge it
1. Use the included USB cable for charging. Connect one end to a USB
charger, and the other to the keyboard. (USB charger is not included)
2. In charging, the power indicator will turn red. Generally, it takes
approximately 4 hours for a full charge.
Troubleshooting
If you are unable to connect the keyboard to your tablet, please try the
following:
1. Starting with a full charge on both devices ensures that process won’t be
interrupted by a low battery.
2. Make sure your tablet’s Bluetooth is on.
3. Make sure that the keyboard is within the effective operation distance of 33
feet (10m).