User's Manual

SPECIAL NOTE:
1. Please get it charged before first usage.
2. Only one device can be actively paired at one time.
3. After pairing for the first time, your tablet will connect to the keyboard
automatically when opening the keyboard.
4. In case of connect failure, delete the pairing record from your tablet, and try
the above procedures again.
Power Saving Mode
The keyboard will enter sleep mode when idle for 30 minutes. To re-activate it,
press any key and wait for 3 seconds.
Charge it
1. Use the USB cable for charging. Connect one end to a USB charger, and
the other to the keyboard. (USB charger is not included)
2. In charging, the power indicator will turn red. Generally, it takes
approximately 4 hours for a full charge.
Troubleshooting
If you are unable to connect the keyboard to your tablet, please try the
following:
1. Starting with a full charge on both devices ensures that process won’t be
interrupted by a low battery.
2. Make sure your tablet’s Bluetooth is on.
3. Make sure that the keyboard is within the effective operation distance of 33
feet (10m).
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.