User's Manual

Pairing Steps
1. Switch OFF/ON to ON, the power indicator will light up for 3 seconds.
2. Press the "Connect" button to enter pairing mode. The status indicator will start
blinking. The keyboard is now ready to connect to your device.
3. Activate the Bluetooth function on your device. Select Settings > Bluetooth >
On.
4. Locate and select “Bluetooth Keyboard” in your Bluetooth menu. The
Bluetooth indicator light will stop blinking to indicate a successful
connection.
Note:
1. Only one device can be actively paired at a time.
2. After a successful pairing, your device will automatically reconnect to the
keyboard when it is switched on.
3. In case of connection failure, delete the pairing record from your device, and try
the pairing instructions again.
Sleep Mode
The keyboard will enter sleep mode after remaining idle for 10 minutes.
To activate it, press any key and wait for 3 seconds.
Charging
1. Use the included USB cable for charging. Plug one end into the keyboard and
the other end into your preferred USB charger. (USB charger is not included.)
2. When charging, the power indicator will turn red. Generally, it takes around 2
hours for a full charge. (Output: DC 5 V/500 mA.)
Package Contents
1 x Bluetooth Keyboard
1 x USB Charging Cable
1 x User Manual
Specifications
Bluetooth Version
BLE 5.0
Operating Range
Up to 33 feet or 10 meters
Working Voltage
3.0-4.2 V
Working Current
1 mA
Charging Current
180 mA
Sleeping Current
0.01 mA
Re-connect Time
3 seconds
Stand-by Time
180 days
Charge Time
≤ 2 hours