Wireless+2.
Packing Content 1* Dual-mode Wireless Keyboard 1* Dual-mode Wireless Mouse 1* 2.4G USB receiver ( For 2.4G connection only ) 1* Type-C Charging Cable 1* User manual Specification of Keyboard Connected by Bluetooth & 2.4G receiver Dimensions 432*135.43*23.3mm / 17x5.33x0.92 in Operating distance ＜8 m / 26.2 ft Rechargeable lithium battery 280mAh Compatibility iOS, Android, Windows, Mac Specification of Mouse Dimensions Operating Range Rechargeable lithium battery 109.43x60.51x30.93mm / 4.3x2.
① ON/OFF Switch: turns the mouse on and turn off. ② DPI Switch: DPI can easily adjust the sensitivity 800 -1200 -1600 -2400 of mouse. To change the setting, press the DPI button. Pairing Steps A. 2.4G Wireless Connection Step 1. Flip the power switch to the ON position. Step 2. Plug the 2.4G USB receiver into the port of computer (storaged in the slot of back of keyboard.) Step 3. Press directly of keyboard to switch to 2.4G wireless mode. Step 4. Turn on the mouse.
b. Mouse re-pairing: Step 1. Plug out the 2.4G USB receiver and turn on the mouse. Step 2. Holding down "Left-button, Wheel button and Right-button" for 3s without loose , and the indicator flash rapidly. Step 3. Immediately insert the 2.4G USB receiver into the computer within 10s and keep the mouse close to the receiver within 30cm (0.98 ft ). B. Wireless Bluetooth Connection a. Keyboard pairing: Pair with 1st device Step 1. Flip the power switch to the ON position. Step 2.
F4 Volume- F4 Volume- F5 F5 Volume+ F6 Volume+ Previous track F6 Previous track F7 Play/Pause F7 Play/Pause F8 Next track F8 Next track F9 Home F9 Web browser F10 Search for F10 Search for Power Power display N/A display N/A Note. After connecting to your device, you must press the Fn + relative OS keys ( Q for Mac, W for Windows ) to select the specific operating system. Sleep Mode The keyboard and mouse will enter sleep mode if idle for 10 seconds. Press any key to exit sleep mode.
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
