User's Manual

名称：外单瀚可SK100说明书-白色 128G双铜+风琴折 展开尺寸560*100mm 折好尺寸：140*100mm Y.047.1048
Computer Soundbar
SK100
User Manual
Specification
Wired Connection via 3.5mm Plug
Attention
1 x Computer Soundbar (SK100) 1 x 3.5mm Audio Cable 1 x User Manual
Device Model
SK100
Bluetooth 5.0 & 3.5mm audio plug
USB plug (no built-in battery)
DC 5V 2A Max
Two Connection Options
Power Supply
Power Input
Wired mode: the soundbar defaults to this mode when it is turned on.
When the Bluetooth Indicator light is off, it means the wired mode is on.
Insert the 3.5mm Audio Cable into the "AUX IN" jack at the back of the soundbar and plug the other end
into your device.
The soundbar does not have a built-in battery, please insert the USB plug into the USB port on the desktop,
laptop, tablet, power bank, etc.
Button Control
Function
Power On
Power Off
Bluetooth Mode
On / Off
Bluetooth Pairing
Bluetooth Connected Beep
/
/
/
Beep when highest
volume is reached
Beep when answering
Volume +
Volume -
Play / Pause
Answer / Hang Up
Phone Call
Decline an Incoming Call
/
Turn the Volume Knob clockwise
Turn the Volume Knob
counter clockwise
Press the Volume Knob once
Press the Volume Knob once
Press and hole the Volume Knob
for 1 second
Bluetooth Indicator (blue) flashes
every 5 seconds
/
/
/
/
/
Insert the USB plug
into any USB charging
adapter or active
computer USB port
Unplug the USB power cord
Press the Volume Knob
twice quickly
/
Beep
/
Beep
Beep
Power lndicator
stays solid blue
/
/
Bluetooth Indicator flashes blue
and white alternately
Operation Voice Prompt LED Indicator
1
4 5 6 7
2 3
Note:
● When want to use wired mode, please make sure the soundbar is not in Bluetooth mode.
● Quickly press the volume knob twice to switch from Bluetooth mode to wired mode.
Volume Knob Power lndicator
Bluetooth Indicator AUX OUT Jack
AUX IN Jack
Back
Back
Use Your Soundbar
1. Switch to Bluetooth mode
Wireless connection via Bluetooth
2. Pair with your device
Once connected, a beep will be heard and the Bluetooth indicator (blue) will flash every 5 seconds.
Note:
● Make sure the soundbar isn’t connected to other devices, otherwise please disconnect this device.
● If you can't find other connected devices, please press and hold the knob for 3 seconds to return to the
Bluetooth pairing mode (Bluetooth Indicator flashes blue/white).
● Keep the soundbar and your device within 16ft/5m.
Press the Volume Knob twice quickly to turn on Bluetooth mode.
When the Bluetooth Indicator flashes blue/white, it means the Bluetooth pairing mode is on.
Turn on the Bluetooth of your device and search for nearby devices.
Find “SK100” in the search results and tap to connect.
Bluetooth Indicator
Troubleshooting of Sound
If there is no sound comes out from the soundbar, please try the following operations:
Rotate the volume knob clockwise to raise the volume of the soundbar.
Adjust the volume on your device.
Press the volume knob to resume in case the soundbar paused.
Re-insert the USB plug
Troubleshooting of Bluetooth Connection
Make sure that the soundbar Bluetooth paring mode is on(Bluetooth Indicator flashes blue/white).
Make sure the Bluetooth of the soundbar is not connected by other devices.
Unplug the 3.5mm Audio Cable from your device.
Delete "SK100" memorized on your device, then search for "SK100" and connect again.
Package Included Product Diagram
4 5
3
2 1
1
1
2
3
1
2
1
2
2
3 4
5
Computer Soundbar
SK100
User Manual
/Bluetooth Out of Range /
Bluetooth Indicator flashes
blue and white alternately
SK100
Worry-free Service Guarantee
● 30 days free return and exchange.
● 18 months warranty.
● Lifetime friendly customer service.
Please contact us for more details and further instructions via
[e-mail]
Extend 2-years warranty:
www.nylavee.net
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must withstand any interference received, including
interference that may cause undesired operation.