User's Manual

Select by up and down key. Press the ok key to confirm (delete item
means to delete the camera that has been paired successfully).
it means the deletion is successful when the icon * on the upper of
the camera disappears.when the added item is selected to press
the ok key. The two sub-options are shown as follows figure
Use the up and down key to select, press the ok key to confirm, at
this time the power indicator flashes. At the same time, press
Pair code key in TX camera, the power indicator of the TX camera
is also flashing when Pairing , a few seconds later matched
successfully. When the pairing succeeds, the following figure
When the pairing is successful, the icon * appears the upper of the
camera, After successful pairing the camera can be used, When the
camera is out of range, it will lose contact. Entering the range again
will automatically connect
Note : the camera has been matched at the factory, and there is no
need to re-pairing unless they are out of touch.