User's Manual

2.RX display
2.1 This machine is powered by a 3.7v lithium battery or a DC ad
apter output of 5V/1A, The power Adapter can be used for charging
when the lithium battery is low
Note: Use only the supplied power adapter.
2.2Turn on the device and long press the boot key ,then enter into
the initial system screen.
2.3This machine can support two cameras to monitor
2.4The monitor screen icon is shown in the following figure
2.4.1）
signal strength indication
2.4.2）
The present camera icon (press the switch key to switch.
1 for the first camera and 2 for the second camera)
2.4.3）
Locking a single camera monitor icon (press the switch
key to switch, when switching to circular monitoring, the icon prompt
will be changed. Switching to this icon it means a circular
monitoring)