Quick Guide
- 5 -
2. Set up Camera and Connect to WiFi
2.1 Preparation
Please check the following before using your camera for the first time:
✓Your router has a 2.4GHz WiFi
✓Connect your smartphone to the target WiFi (the one you want the camera
to connect to).
✓Put your smartphone and camera close to your WiFi router, within a
radius of max. three meters (9 feet) during the installation process (once
installation completed; you can move the camera further away)
✓You have the correct WiFi password of this WiFi
2.2 Turning on the camera
✓ Connect the camera to the power by standard USB adapter (5V 1A or 5V
2A). Turn on the camera by pressing and holding the ON/OFF button for 5
seconds, then release.
You will see the status LED light up, which means camera is on and
booting.
✓Wait for 30 to 40 seconds, you will see the Status LED flash in red and
blue.
✓If the status LED does not flash in red and blue, please try resetting the