User Instructions

第 2页，共 10 页
●Output current: <2A (each circuit) 5V<30W12V<72W, 24V<144W
3. Controller:
4.Instructions:
①Instructions for Remote Control:
The remote has 23 buttons
：
In any state, press to close and open the controller.
：Press this button in the dynamic mode to adjust the speed of the
dynamic mode plus + minus -, a total of 10 poles; then in the music rhythm mode,
the rhythm sensitivity can be adjusted; in the setting state, the number of lights
can be adjusted to add + minus -.
：Press this button in the power-on state to switch the dynamic mode
plus + minus a total of 121 changes in effect, in the setting state can adjust the
number of lights plus + minus -.
：Press this button in the power-on state to automatically cycle all
the patterns.
: Press this button in the power-on state for brightness adjustment -
+ a total of 10 pole dimming.
: Children lock Press the key of the remote control to lock, then press
the key to unlock, all remote control keys can be used.
：Under the boot state, press this button 6 times and a white light will
flash to enter the setting state. When setting the RGB line sequence, for example,
press the red button press the green button press the green button press the blue
button press the blue button to set the stop operation for 10 seconds automatically
saved state. When setting the number of points, it is also in the power-on state.
Press the button for 6 times and a white light will flash to enter the setting state.