User Instructions

第 3页，共 10 页
After the white light is lit, press SPEED to add and subtract the number of points
for one point and then press MODE to add three points and three points to the number
of points you need.
：Press this button in the boot state: static white static red static
green static static blue static yellow COLOR+ static COLOR plus COLOR- static COLOR
minus.
：There are 8 different music effects with the music mode plus or minus
keys.
②Instructions for on-board keys
Red indicator light: when the indicator light is on, it indicates the energized state
of the equipment.
Green indicator light; Infrared indicator light, the remote control press the green
light once and it will flash, indicating that the infrared signal is received. When
the remote control has no operation, the indicator light is not on. When the green
light flashes, it enters the distribution network mode.
：
In static mode, press this button briefly to adjust the brightness level 1-10. In
dynamic mode, press this button to adjust the change speed of level 1-10; in rhythmic state,
press this button to adjust the sensitivity of level 1-10. Long press for about 3 seconds to turn off
the light.
：Pressing this key in the boot state is a dynamic mode switch plus
+ minus a total of 121 changes in effect.
：When the light is turned on, long press this button to enter the rhythm mode, short
press can switch static colors, with 8 rhythm effects.