User Instructions

第 4页，共 10 页
5.Connection mode of optical tape and matters needing attention:
First connect the load line, then connect the power line; Before power-on, ensure
that there is no short circuit between cables.
When operating, the remote control points to the infrared receiving head to ensure
that there are no obstacles between the remote control and the receiving head;
6.APP(TuyaSmart) Connection instructions and download QR code：
Step 1: Enter the state of distribution network. There are two ways to enter the
state of distribution network.
①Long press the ON button ON the infrared remote control for about 5 seconds, and
the green indicator flashes into the distribution network mode.
②The device is switched on and off continuously for 3 times, and the green indicator
light flashes into the distribution network mode.
③Long press the MODE+ key for 3 seconds to enter the distribution MODE.
Step 2: Open the APP(TuyaSmart)