Safety Instructions

1.Press the MENUbutton and the menu bar will pop up.
2.Press the LEFT button or RIGHT button until Lullabiesicon is
highlighted.
3.Press the UP button or DOWN button to choose the desired from
1-4 Lullabies, Cycle or OFF .(The default setting is OFF)
7.6 Pairing
The baby unit is pre-paired to your parent unit.You do not need to pair it again unless the
baby unit loses it link with the parent unit. To re-pair your baby unit, follow the procedure
bellow:
Note: Before you begin pairing, be sure to have the monitor and the camera side by side.
1. One Parent Unit , One Baby Unit:
1.1. Make sure the power indicator on the bottom of the baby is always on and
the parent is in the power off state.
1.2. Press and hold the ON/OFF button until the blue LED light flashes
rapidly in the upper right corner of the screen. The screen enters the pairing
mode then release the ON/OFF button. Immediately pressand hold the pair
button on the bottom of the baby unit until this indicator flashes quickly.
1.3. If sucessful, the video will display on the screen. If unsucessful, please try
it again.
2. One Parent Unit ,Two Baby Units:
2.1.Press the MENU button and the menu bar will pop up
2.2. Press the LEFT button or RIGHT button until Camera Selected icon is
highlighted
2.3.Press the UP button or DOWN button to select the desired camera
channel from 1-4 Camera Channel ,press the ON/OFF button to turn off.