User Manual

5
Red
White
To the Line In/Aux In jacks on
the external Audio Amplifier
INITIAL SET-UP
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit.
Your unit is ready to be connected to a mains voltage of DC 5V adaptor.
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may wish to connect it to
your existing HiFi system. Connect the audio plugs to the Line input on your mixer or amplifier using
an RCA cable (not supplied).
 Red plug into “R” channel input.
 White plug into “L” channel input.
TURNTABLE OPERATION
1. Turn on the power switch ⑦, which will go to the phono mode automatically, you can see
“PHON” on the LED display panel.
2. Set the Speed Switch ④ accordingly.
3. Place the record on the turntable ⑧. Use the 45 RPM Adapter ② if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: Toavoid stylus damage, make certain the
included stylus guard is in place whenever the
turntable is being moved or cleaned.
5. Release the tone arm hold down clip asbelow.
Note: when the turntable is not in use, rememberto
lock back hold down clip.
Plastic protective cover(white)
6. With the tone arm lever ⑨ in the “up” position, lift the tone arm across and over the position of
the record where play is desired to begin. Move the height lever to the “down” position and begin
playing.
7. When the record is finished playing, lift the tone arm by moving the height lever to the“up”
position and return it to the tone arm rest.
8. Lock the tone arm clip to secure the tone arm.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the Turntable without securing
the Tone Arm clamp could result in damage to the Tone Arm.
Clip