Stereo Bluetooth Headphone BT-80 User Manual
SPECIFICATIONS Bluetooth version: Bluetooth V4.2 Support: HFPV1.2, A2DPV1.3, AVRCPV1.4, HSP1.6, GAVDP1.2, IOP SNR: 96dB SNR stereo ADC and stereo DAC Sensitivity: -80dBm<0.1%BER Transmission distance: 10m Frequency: 2.4 -2.480GHZ Transmission power: CLASS2，4dbm Audio SNR: ≥75dB Audio performance: SBC decoding Battery capacity: 3.
OPERATION GUIDE Power On: Long press Power Off：Long press for 3 seconds, sound prompt. for 3 seconds, sound prompt. Answer/Hang up Calls: Single press Re-dial Last Phone Call: Double press Play/ Pause Music: Single press Volume +/-: Long press / Previous/Next Song: Single press / PARING 1. Initial Pairing: Bluetooth headset will enter pairing mode automatically, sound prompt. Turn on Bluetooth function on device and select BT80, no PIN code needed. Sound prompt when pairing successfully. 2.
LED INDICATOR LIGHT 1. Charging: Red light keeps on in charging mode, light off when fully charged. 2. Power on: Blue light keeps on. 3. Pairing mode: Green and blue lights flashing alternately. 4. Standby mode: Blue light keeps on. 5. Paired mode: Blue light keeps on. 6. Play mode: Blue light flash every 1 second. ATTENTION 1. Please charge the Bluetooth headset when sound prompt. 2. The port at the button of headset is for audio input only, please DO NOT connect other headphones.
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.
