Bluetooth Headphone BT86 User Manual
SPECIFICATIONS Bluetooth version: Bluetooth V3.0+EDR Support: HFPV1.5, A2DPV1.2, AVRCPV1.4, HSP1.2, GAVDP1.2, IOP SNR: 96dB SNR stereo ADC and stereo DAC Sensitivity: -80dBm<0.1%BER Transmission distance: 10m Frequency: 2.402 -2.480GHZ Transmission power: CLASS2, 4dbm Audio SNR: ≥75dB Audio performance: SBC decoding Battery capacity: 3.
OPERATION GUIDE Power On: Long press Power Off：Long press for 2 seconds, voice prompt Power On”. for 2 seconds, voice prompt “Power Off”. Answer/Hang up Calls: Single press Re-dial Last Phone Call: Double press Play/ Pause Music: Single press Volume +/-: Long press / Previous/Next Song: Single press / Aux-in: The headset will switch to wired mode automatically once insert the audio cable to the Aux-in port and audio device, no need power. PARING 1.
1. Charging: Red light keeps on in charging mode, blue light on when fully charged. 2. Power on: Blue light flash for 1 time. 3. Pairing mode: Red and blue lights flashing alternately. 4. Paired mode: Blue light flash every 1.5 seconds. 5. Standby mode: Blue light flash every 1.5 seconds. 6. Play mode: Blue light flash every 1.5 seconds. 7. Power off: Red light keeps on for 3 seconds. ATTENTION 1. The port at the button of headset is for audio input only, please DO NOT connect other headphones. 2.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
