User's Manual

编码：507-8032A-033R 105G 铜板纸 HSD8032A 英文说明书/290*105MM 改 2
编写： 排版： 翻译： 审核： 批准：
Instruction Manual
Main Features and Technical Parameters
●Bluetooth audio player
●Audio Max power: 1.5W
﹫THD≤1.5％
●Max power consumption: 1W
●Luminance:
≥30LM
●Frequency response: 80Hz-20kHz
●Power supplied: built-in rechargeable lithium battery
●Charged by Micro USB 5V use to rechargeable for the speaker
●Charging time: round 3.5 hours
●Continue playing music in maximum volume about 7 hours
when built-in lithium battery is fully charged
●Bluetooth receiving distance:
≥10M
Product Illustration
Night light function
The Bluetooth speaker is with LED light function, short press
“ ”for light ON/OFF, or long press “ ”to adjust the dimmer
function.
Bluetooth playback
1.Long press “
” to power ON, status indicator light blue
flashing rapidly, it produces a tone of power on, and then long
press again for turn off.
2.Turn on your cell phone or Bluetooth device on the Bluetooth
function, and search for devices in the Bluetooth menu.
3.When “Hiting” appears on the Bluetooth device list. Select
“Hiting” to establish pairing and connection (if ask for a passkey,
enter 0000).When the pairing and connection is successful, it
produces a connected tone, and status indicator changes to blue
flashing slowly, the speaker is ready for playing music. Short press
“
” to play music.
4.When the connection between the mobile and the speaker is
successful, and the speaker is playing music, short press “
” to
Play /Pause music, short press“ + ”key to change to next
song, short press“ – ”key to change to last song, long press
“ +/- ”to increase and decrease the volume.
5.If the pairing is overtime or no flash for indicator light, please
repeat step 1 to 3 for re-connection.
6.When the connection between the mobile and the speaker is
successful, long press “
” for 2 seconds can disconnect the
Bluetooth connection, the state indicator light blue flashing rapidly,
back into the Bluetooth pairing mode, short press “
” automatic
connection last connection device.
Power supply
1.Take the portable belt bottom of the product counterclockwise
rotate and take down. The Micro USB connected to the computer
or DC 5V adapter, and charging the built-in rechargeable lithium
battery synchronously, the red indicator flickers, after the full
charge, the red indicator on.
2.When there are no Micro USB power supply for the product,
the product is powered by the built-in rechargeable lithium battery.
Troubleshooting
Failure Manifest Solutions
Equipment can not
pair with Bluetooth
audio connection
Lower battery, please charge
Try to move the Bluetooth device closer to the
speaker
Turn off & restart
Device of the computer has Bluetooth function
or not
Try repeating this product Bluetooth playback
and set up steps
play the music in the only one device, cancel
Equipment and unused pairs(see the documents
for help), in accordance with the procedure set
pairing new devises
Bluetooth name is not correct, confirm whether
“Hiting”
Bluetooth playback
inter
r
u
p
t
Lower battery, please charge
Music intermittent
in Bluetooth
playback
Try to move the Bluetooth device close to the
product or change the audio or equipment
location or lower battery, please charge
Cautions
1.The product accords with IPX5 waterproof level, don’t directly
rainy or put in water, should be kept away from fire, high
temperature environment to avoid the product does not work
normally and explosion.
2.When playing music, the Bluetooth speaker disconnect and
shutdown suddenly, can’t turn on the speaker or the light out after
some minutes lighting, that is low battery ,please change it.
3.When the product is playing music via Bluetooth technology,
the music may cause intermittent or noise because of the
environment or the source device (such as mobile phones)
interference or software incompatibilities ect... Please adjust the
distance between the music device and the unit, or restart the unit’s
power supply or restart the music device or change to other music
source to have better sound performance.
4.When DC 5V is for power supply, the power supply current
should be more than 1A.
5.If it is stopped using for a long time, please make sure it is full
charged.
6.The product built-in rechargeable lithium battery, please do not
pollute the environment when discarded, try to classify recycling.
7.The product should be used for the first time after the battery is
fully charged.
Packing Accessories
1.Micro USB cable x 1.
2.An adapter (optional).
3.Instruction manual x 1.