User's Manual

Instruction Manual
Main Features and Technical Parameters
● Bluetooth audio playback
● Speaker: 4Ω*1
● Φ3.5mm Audio input interface
● Audio maximum power: 3W
● Frequency response100Hz-20KHz
● Built-in rechargeable lithium battery for power supply
● Charging time about 6 hours
● It works 4.5 hours when fan is on and music at Max.
volume
● Power charge indicator, status indicator
● Bluetooth receiving distance: ≥10M
Product Illustration
Fan ON/OFF
Short touch“Fan ON/OFF”key to turn on or turn off the fan.
Bluetooth playback
1.Long press“ ”to power on the speaker, status indicator
flashes rapidly. It produces a tone of power on.
2.Turn on your cell phone or Bluetooth device on the
Bluetooth function, and search for devices in the Bluetooth
menu.
3.When "Hiting" appears on the Bluetooth devices list, select
"Hiting" to establish pairing and connection ( if asked for a
passkey, enter 0000 ).When the pairing and connection is
successful, it produces a connected tone, and status indicator
changes to slow flash, the speaker is ready for playing music.
Short Press“ ”to play music.
4.If the pairing is overtime or no flash for status indicator light,
please turn speaker off and restart it, repeat step 1 to 3 for
re-connection.
5.When connection is successful. Press“ ”2 seconds to
disconnect the current Bluetooth, then hold for 2 seconds to
turn it off. Or long press 4 second to turnoff it directly. Status
indicator is off. If Bluetooth is not connected, long press 2
seconds to turn it off, status indicator is off.
Audio input
Please insert 3.5mm audio cable into the audio input port of
the product, with MP3, IPOD, cell phone or other audio
connections, audio music playback, adjust the audio output
volume to achieve the best sound, and the status indicator is
on.
Charging And Computer Connection
1.Connect DC 5V adapter with 3.5mm DC jack on speaker
for power supply and charging the built-in rechargeable
lithium battery synchronously, the power charge indicator is on.
After the full charge, the power charge indicator is off.
2.It produces “di. di. di…” sounds when low battery, and then
Bluetooth will be off automaticly, fan is still working, when
battery voltage is too low, protection circuit shut off the power,
fan stop working.
Packing Accessories
1.USB cablex1pc. 2.Audio cablex1pc.
3.User manualx1pc.
Troubleshooting
Failure Manifest Solutions
Equimpment cannot pair with
Bluetooth audio connection
Lower battery, please charge
Try to move the Bluetooth device closer to the
speaker
Turn off & restart
Device of the computer has Bluetooth function or
not
Try repeating this product Bluetooth playback and
set up steps
Play the music in the only one device , cancel
Equipment and unused pairs (see the documents
for help), in accordance with the procedure set
pairing new devices
Bluetooth name is not correct, confirm whether
“Hiting”
Bluetooth playback interrupt Lower battery, please charge
Music intermittent in Bluetooth
playback
Try to move the bluetooth device close to the product
or change the audio or equipment location
Fan doesn’t work or rptate slowly Lower battery, please charge
Cautions
1.This product is indoor use only.
2.Protect Product to stay away from raining, moisture fire,
high temperature environment, so as not to damage the
product.
3.Do not touch the fan with your hand or touch it with other
objects while the fan is working, in order to avoid injury or
damage to the fan. Use by children must be under tutelage of
adult, to prevent children from harm.
4.When DC5V is for power supply, the power supply current
should be more than 1.5A.
5.The product built-in rechargeable lithium battery, please do
not pollute the environment when discarded, try to classify
recycling.
6.The product should be used for the first time after the battery
is fully charged.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
To assure continued compliance, any changes or modifications
not expressly approved by the party.
Responsible for compliance could void the user’s authority to
operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition without
restriction.