Operating Manual

•Before operating LaserPecker 3 equipment, please carefully read the operation contents and strictly observe the operating procedures.
• This equipment uses four types of lasers (intense laser radiation), which may cause the following accidents: 1) Light up the surrounding
flammable materials; 2) During the laser operation, other radiation, harmful gases, toxic gases or smelly gases may be produced due to
different laser radiation objects; 3) Direct exposure to laser emission may hurt human body. Therefore, the operator must keep a distance
from the equipment, and wear protective equipment (such as goggles, protective covers, protective clothing or firefighting equipment,
etc.). It is strictly prohibited to pile up flammable and explosive items around the workbench and equipment. The working environment must
be kept well ventilated.
• There may be risks during the laser working process. The users should carefully consider whether the material of the carved object is suitable
for laser operation.
• The working voltage of the equipment is 12V5A. It should be powered using the adapter of suitable specification. Operation during
overload or voltage instability is strictly prohibited. Under the premise that the power supply (such as the patch board) used by the power
plug of this product does not work effectively, the power supply cannot be connected, otherwise there will be a dangerous risk of electric
shock.
• This product is internally equipped with precise and dangerous laser source components. The equipment is strictly prohibited to work near
appliances with strong electromagnetic interference because this may cause electromagnetic interference. When the laser source is turned
on, there will be laser emitted at the speed of light. The user must avoid direct exposure to the laser beam.
• It's strictly prohibited to place any irrelevant object of total reflection or diffuse reflection in the equipment, in case the laser may be
reflected to human body or inflammables.
• Before carving objects using this product, please ensure that the emissions resulting from laser exposure to the carved objects meet the
local laws and regulations.
/Use safety guide
09