User's Manual

6
Mounting Requirements
Bearing
You can choose the potable mounting according to your needs.
If you choose portable mounting, use the mounting rack or support. If you want to use a self-made mounting
rack, the bearing capacity of the rack should be at last four times of the actual weight of the display. The
bearing capacity of the mounting support must be at least four times of the actual weight of the display to
ensure steadiness of the interactive panel.
Ventilation
Ventilation
requirements
Distance to the mounting surface (cm)
Nominal power
Left and right sides
Top
Bottom
Back
Larger than 100W
10
20
20
10
Note: in addition to the above-mentioned requirements, the area of ventilation holes at the bottom, top and
two sides must be at least 50% of the sealing surface to ensure proper ventilation.
Figure:
* See CAS 132-2006