User's Manual

Open Signal to show the following interface. Press ▲/▼ to select an option and press OK. You can also click

an icon on the interface.

Note: The interactive panel will automatically detect signals when it is started or there is no signal.

Press Menu on the remote control to show the menu (Image → Sound Mode → Channel → Setting → Time

→ Parent Control). Scroll left and right on the screen or press ◄/► to switch between options.

Image

The Image menu shows options including Image Mode, Color Temperature, Zoom, Image De-noise, and

MPEG De-noise. There are two ways to set it:

1.1 Click an icon and set it.

1.2 Press ▲/▼ to move the cursor onto an option. Press OK and press ◄/► to adjust the value. Press

Back to quit the menu.

Note: When the image mode is Custom, you can adjust the contrast, brightness, hue, sharpness and

saturation.

Sound Mode

The Sound Mode menu shows options including Sound Mode, Equalizer, Sound Balance, Surround,