User's Manual

44
Maintenance Tips
 Do not put or install the product near a heat source or under direct sunlight, in dusty or humid places, or where
the product can be affected or damaged by mechanical vibration. To maximize the performance, it should be
put away from equipment such as grid, large metal objects and radar stations as far as possible.
 Do not wipe the panel with any chemical agent. Solvents may damage the enclosure or paint. If the panel
is stained by dust, please cut off the power, soak the clean cloth in warm water, wring it to clean the
panel. You should use a clean soft cloth to clean the LED display of the panel.
 Do not frequently switch on and off the product. This can shorten the product’s service life. After the
panel is switched off, please wait for three minutes before switching on it again. If the product is not to
be used for a long period of time, please disconnect the product from power supply.
 Do not maximize the brightness and contrast of the LED display for a long period of time, which can
shorten the LED display’s service life.
 Do not write on the touch screen with a hard object, which can scratch the LED display.
Specifications
Screen size
80”
Backlight type LED
Aspect ratio 16:9
Viewing angle 178°
Physical resolution 1920*1080 Pixel
Image/Sound system PAL/DK, I
Working voltage AC 90-265V, 50/60Hz
Power consumption Standard: <150W, standby: ≤0.5W
Touch screen material Tempered glass
Sensing method Infrared
Technical feature HID drive-free
Touch point Multi-touch
Writing method Fingers or pen
Resolution of touch screen 32767*32767
Communication interface USB
Storage temperature/humidity
-20°C～60°C, 10%～90%
Working temperature/humidity
5°C～50°C, 10%～90%
Installation method Wall or portable mounting
Dimensions 1919*1124*100 mm
Weight
95KG
* HiteVision may modify the user manual without prior notice.
* If you discover any unclear presentation, mistake or omission in this manual, please contact with us
immediately. HiteVision is not liable for any loss or damage if you fail to contact with us.