User's Manual

6. : Show or hide menu.
7.
: Show or exit from the list of signal sources.
8.
: Enable audio only mode.
9.
: Freeze.
10.
: Up/Down/Left/Right direction buttons
11.
: Confirm.
12.
: Capture screen shots.
13.
: Show the current signal source. You cannot show it in Android.
14.
: Adjust screen displaying.
15.
: Open WIFI on the computer.
16.
: Change the display mode.
17.
: Turn to the previous page on white board software and PPT.
18.
: Turn to the next page on white board software and PPT.
19.
: Open white board software.
20.
: Switch over to VGA signal source.
21.
: Switch over to HDMI signal source.
22.
: Switch over to OPS signal source.
23.
: Zoom in and out.
Instructions of Remote Controller
The usage scope of the remote controller includes the vertical distance within five meters in
front of the product, and the area within an angle of 30 degrees from the vertical point to the
left and the right.