User's Manual

Step 3 Press power switch on the control panel or Power on the remote controller to turn on
the interactive panel. The OPS is started. The power indicator turns green.
3.2 Power off
Step 1 Press PC Power to turn off the OPS (for all-in-one models only).
Step 2 Press Power on the control panel or Power on the remote controller to enter the
standby status. The power indicator turns red.
Step 3 In the standby status, switch off the rocker switch to turn off the interactive panel.

Turn off the OPS before you turn off the interactive panel. Otherwise, the computer may
be damaged.

Disconnect the interactive panel from power after the panel enters standby status.
Otherwise, the panel may be damaged. A sudden power failure may damage the interactive
panel.

Frequent power on and off in a short time may cause faults.
Status of the power indicator is as follows:
Power Indicator Status
No light Powered off
Red Standby