User's Manual

● Clean with a soft dry cloth

The projector is dirty; please clean it with a soft dry cloth soaked in the water

and neutral detergent diluents. Wring the cloth till dry before wiping; diluents,

benzene and any other volatile chemical are not allowed to clean the projector,

otherwise the printing would be wiped and dirty the projector.

● Display screen pixel does not work

Although the projector is made using the most advanced digital technology,

some pixels on the display screen may still don’t work, which are normal, instead of

malfunction.

● Avoid strong impact during projection

 If the projector accidently suffers a strong impact, the projected image may

disappear for a while, and then the image will appear again, but color

anomaly or error messages may occur;

 If any color anomaly of the projected image, please reselect the input source;

 If the projected image color is still abnormal, according to the operation steps

of "Turn on and Turn off the Projector" in page 25, turn off the power, and

then reboot.

● Note after using

The air outlet and its surrounding will be extremely hot in using and still very

hot after shutdown. Therefore, seize two sides of the projector when moving.

● How to put the projector into portable package

Make sure the projector isn’t hot before encasing.