Guide for Quick Start and Warranty Card
Announcement This company is committed to constantly improving and perfecting the performance of the product and strengthening the functions of the product. Pictures and functions presented in the guide are all based on the actual product and the ex-works configuration, and the company reserves the right to modify the functions and man-machine interfaces described in this manual without prior notice, so please take the actual product as the final say. You are requested to properly keep your equipment.
Safety instruction Before use, please carefully read the product guide and properly keep the product so as to ensure the need of emergency use; During projection operation, do not block the air inlet or outlet of the product so as to prevent damage to the product due to overheating; the product must not fall from height or be knocked, which may cause damage to it; The lens slide of the product is electrically controlled and forcible operation by hand is prohibited; For any problem observed, please contact t
List of components Contents Appearance and Functions Distance and Projection Size Touch-control Power Button and Indicator Electric Lens Slide Projector x1 Remote control x1 Power adapter x1 Remote Control Focus Adjustment Bluetooth Audio Keystone Correction AC cable x1 Manual x1 Certificate of compliance x1 Remarks: Please check whether the product you recieved is consistent with the list; If any discrepancy observed between the product or accessories and the component list, please do not hesitate
Appearance and Functions of Projector System Upgrading Switching of Video Signal Source Setting of Wireless Display Peripheral Connection Touch-control Power Button Air inlet Indicator JMmGO Control Air inlet Instruction of Environment-friendly Use Product Warranty Card Air outlet Electric lens slide
Appearance and Functions of Projector S/PDIF Appearance and Functions of Main Machine USB2.0 HDMI AV-IN Base Screw(can be used for the adjustment of projection angle) 1/4 screw hole of international standard (Support crane shot) USB3.
Distance and Projection Size The distance between the lens and the screen, the zoom setting and the video format will all impact the size of the projected picture. The best projection distance of JMGO product is about 0.5m~4m, out of which the brightness and definition of projection will be compromised and impact the projection result.
Touch-control Power Button and Ind Indicator Electrical Lens Slide Touch the power button on the top of the machine or give a short press on the power button of remote control to switch on/off projection with the electric lens slide automatically opening/closing; When the machine is switched off, the lens slide can provide a full protection to the lens. Forcible operation of the lens slide by hand or outside force is prohibited; otherwise it may damage the structure of the equipment.
Remote Control Focus Adjustment 1. Automatic focusing for a clear project picture can be achieved as soon as the equipment is switched on. Mute Direction Button(Up, Down, Left, Right) Confirmation Power Back (Side) Sound Volume + (Side) Sound Volume JMmGO Button Home Menu Focus Adjustment Button+ Focus Adjustment Button- Note: 1. When using the remote control, please ensure there is no obstacle between the remote and the JMGO product; 2.
Focus Adjustment Bluetooth Audio After being connected to the power supply, before switching on the projection, the machine can be used as a bluetooth audio which can be connected with other bluetooth equipment such as mobile phone. The connection can be achieved by following steps: 1. Open the bluetooth of the equipment and search the available bluetooth equipment. 2. Find out "JMGO-XX" in the available list, and get them paired up. 3.
Keystone Correction Find out Desktop Application> Setting> Image> Keystone Correction. In case of projection inclination observed during the use, the keystone correction function can be used to make the projection produce a standard square image. 3D Play When playing 3D films, the mode of 3D film source can be set at the shortcut menu of the player interface which can be called out by giving a slight press on the JMGO button of remote control.
Network Setting This product support both cable-based and wireless-based network connection modes: For cable-based connection, it can be achieved by directly plugging in the cable. For wireless connection, find out Desktop>Network>Wireless Network, then select the usable network for WiFi connection. Version of System Find out Desktop> Setting> About> About Equipment, and the software version of the main machine can be checked.
system upgrade This product supports both online upgrading and local upgrading. Online upgrading: Find out the Setting menu at the desktop and successively enter into system is in the latest version. If the current system is already the latest version, the system will indicate the same while if it is not the latest version, the system will ask whether to upgrade it.
Switching of Video Signal Source When outside signal source is input into JMGO equipment through HDMI or AV interfaces, give a short press on JMGO button of remote control to call out the shortcut menu or find out the "signal source menu" on the desktop for entering into the signal source setting interface.
Peripheral Connection Fun Control This product supports mobile phone control. Scan the barcode below and you can download and install the "Fun Control" application through which you can use mobile to easily control and operate the equipment. Fun Control supports both Android equipment and IOS equipment.
Instruction of Environment-friendly Use Name and content of micro poisonous and harmful substance or element contained by all parts of this product: Toxic Hazards or Element Part Name Lead (Pb) Mercury Cadmium (Hg) (Cd) Hexavalent chrome Polybrominate Polybrominated (PBDE) Diphenyl (Cr(VI)) Projector Remote Control Cable Adapter Packing Material O: It means that the content of such poisonous and harmful substance in all homogeneous materials of this part is less than the limited quantity set forth in
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Manufacturer's Name: SHENZHEN HOLATEK Co.,LTD Trade Mark: J0*260$577+($7(5 Model number: G3 Pro Operating Temperature: - 0° C to 40° C This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.
RF Secification: Function Operation Frequency Max RF outputpower: Limit BT(BR+EDR) 2402MHz–2480MHz GFSK:0.51dBm Pi/4 DQPSK:0.94 dBm 8DPSK:0.55dBm 20 dBm BT(BR+EDR) 2402MHz–2480MHz GFSK:-0.72dBm Pi/4 DQPSK:-0.80 dBm 8DPSK:-1.79 dBm 20 dBm WIFI 802.11b/g /n(HT20, HT40) 802.11b/g/n(20MHz):2412~2472MHz; 802.11n(40MHz):2422~2462MHz 802.11B: 12.3dBm 802.11g: 9.30dBm 802.11n20: 9.50dBm 802.11n40: 9.30dBm 20 dBm 802.11a/ n(20/40) /ac(20/40/80) 5180MHz~5240MHz 02.11a:9.39 dBm 802.11n20:8.29dBm 802.
