User's Manual

z Do not share the outlet with other devices. Make sure the rated current
corresponds to power consumption of this machine if using extension
cord.
z Do not use the bundled power cord
z Do not place objects on the power cord or step on it.
z Do not pull the power cord. Hold the plug when disconnecting it from
the outlet.
z Use the close and easy-using outlet in order to unplug the power cord
at any time when it is necessary
Connect the power inlet with attached AC power cord.
The power on/off indicator on the top of the machine turns to orange when
the power cord is connected to the outlet, which means the machine is
normal and standby.
TurningontheMachine
Press (power) on the top of the machine or (power)（red）on the remote
control to turn on and off the complaceer power， (power)（blue）on the
remote control only turn on and off the project function. When on
the top of the machine lights as white, it indicates that PC disk has started,
when the white indicator flashes continuously, it indicates that PC is
reading the disc, when the white indicator turns dark ,it indicates that
the disc has stopped operation.
TurningofftheMachine
1. Press (power) on the top of the machine to turn off the power.
2. Press (power)（red）on the remote control and confirm the message“Power
off ?Press the power again” displayed at the right down corner of the
screen.
z If you do not turn off the power, the message disappears after 5
seconds. Press [ESC] also can remove the message.
3. Check and make sure that
(power) on the top of the machine turns to
orange, lens blue light circle goes out and unplug the power cord from the outlet.
4. Make sure that the machine, connected external computer or vedio
device are truned off, unplug the power cord from the connected
devices.