User's Manual

SelectingLanguage
Chinese is the default language when the first time to turn on the machine,
follow the steps if you need to change into other languages.
Use the control panel or remote control, press [MENU], and press[∨] or [∧]
to select [Machine setup1], then press [ENTER] to select the language, and then press
[MENU] to confirm the selection.
SelectingInputSource
When turning on the machine, the input source selected at last time will
be the first choice. To select other input sources, follow the steps.
1. Press [SOURCE]
2. Use [▲] and [▼] on the remote control to select the input source name,
then press [ENTER].
AdjustingImage
How to Adjust the Focus
[FOCUS▲] and[FOCUS▼]on the remote control to adjust the focus,
release the button when adjustment is done.
Use the control pane, press [MENU] and press[∨] or [∧] to select [Machine
setup2], then press [Focus], and [＜] or [＞] to adjust , and then press [MENU] to
logoff the operation.
CorrectingKeystone 
When there is a certain angle between the machine and the projection
screen or the wall, the upper and lower sides length of projection image
may be different, this is called “keystone”. This machine has the
function of auto and manual correcting keystone to adjust the projection
image.
Auto Correcting Keystone