User's Manual

Images are fuzzy
Cause Solution
Lens does not focus correctly Use the remote control to adjust the lens
focus
Machine and screen are not aligned. Adjust the projection angle and direction,
or adjust the height if necessary.
Remote control failure
Cause Solution
Low batteries Change the batteries
There is object between remote control
and machine
Remove the barriers
Too far from the machine Keep the distance no more than 8 m（26
inch）
NOTE!
z Try the following instructions, which may recover the machine
1. Unplug the power cord and wait more than 10 minutes.
2. Plug the power cord back and restart the machine.
z If the machine is still abnormal after operating the above
instructions , send the machine to your dealer or HOLATEK service
center