User's Manual

● Disassembling and Modifying
Do not disassemble or modify the machine in any way. The high
voltage parts in the machine may cause electric shock and scalding.
Notice that the malfunctions that caused by dismantling or modifying
the machines by yourself are not in the scope of warranty,
HOLATEK do not provide free repair.
Make sure refer all the internal checking, debugging and repair works to your dealer
or HOLATEK service center.
● Falling and Shocking
Continuing to use the damaged machine caused by falling or other
reasons may result in fire and electric shock. Take the measures
immediately as follows:
1. Turn off the power.
2. Unplug the power plug.
3. Contact your dealer or HOLATEK service center.
● Burning
Do not discard the machine by burning. Explosion, fire and
personal injury may result.
● Looking into the Lens or Air Vents When the Lamp is Switched on
Do not look into the lens or air vents when the lamp is switched
on. The hard light from the light machine may damage eyes.
● Blocking the air vents
Do not block the air inlet or outlet. Otherwise the internal heat
accumulates, which may cause the fire and burn the machine. Make
sure to observe the following precautions:
1. Leave the space at least 30 cm between the machine and the wall.
2. Do not place the machine in stagnant air place.
3. Do not cover the machine with the blanket or other objects.
4. Place the machine on the stable and flat surface. Do not use the machine
on the carpet, blanket, towel, cushion and any other soft surface.
5. Do not erect the machine when the machine is in process.
● Lightning
If there is a thunderstorm, do not touch the power plug.