User's Manual

z High humidity areas
z Areas where temperature may change suddenly
z Areas where is a lot of dust
z Shaky, slant or unstable areas
z Areas where may be got wet
● Do not use the machine in the following areas, otherwise may cause
the malfunctions and damages on the machine.
z Extreme temperature areas (The working temperature
is 5℃ to 35℃)
z Do not place heavy objects on the machine
z Do not insert or fall the foreign objects into the machine
z Do not place vase or any other containers with water
on the top of the machine.
●Do not leave the exhausted batteries in the remote control for a long
time.
Exhausted batteries has fluid leakage ,which may cause the remote control
trouble or even damage.
● Use soft clean cloth for cleaning
If the machine is dirty, clean it with the soft cloth soaked in the water
or neutral detergent diluted solution. Wring the excess water before
cleaning. Never use thinner, benzene or any other volatile agents to clean
the machine. The printed word may be erased and may stain the machine.
●Screen Dot do not Light on
The machine use the most advantaged digital technology，however, some
dots on the screen may not light up. This is a normal phenomenon, not the
malfunctions.
●Do not shock on the machine when it is in process
If machine suffer fierce shock, the projected images may disappear for
a while. The images will appear soon, but could have abnormal color or
error messages.
If the machine image color is abnormal, reselect the source. If the color
is still abnormal, turn off the machine according to the steps in chapter
“Turn on and off the machine” on page 17, and then restart the machine.