User's Manual

Table Of Contents

BELTPACK MENU FUNCTION INTRODUCTION

Select “Pair” and press “OK” button to enter the secondary

menu of the registration feature

1.1. Connect the beltpack with the base station with a USB cable and select any ID

from 1 to 4 then press “OK” to register the beltpack. “Pairing...” will be displayed on

the main interface of the beltpack and the base station. Unplug the USB cable after

“Pairing Successful” is displayed on the screen of both of them.

Select “Application” and press “OK” to enter the secondary

menu of scene mode conﬁguration

2.1. Select “Quiet” and press “OK” when in a quiet environment;

2.2. Select “Noisy” and press “OK” when in a noisy environment.

Select “Mic Type” and press the “OK” to enter the secondary

menu of mic type selection

3.1. Select “Dynamic” and press “OK” to switch to the dynamic mic mode;

3.2. Select “Electret” and press “OK” to switch to the electret mic mode.

Select “Battery” and press “OK” to enter the secondary menu

of the battery information interface

4.1. “Percentage” displays the current power percentage;

4.2. “Core” displays the current battery cell core version;

4.3. “Version” displays the current ﬁrmware version.

Select “Information” and press “OK” button to enter the

secondary menu of system information inquiry

5.1. “RSSI” displays the current wireless signal strength;

5.2. “Mic Type” displays the current mic type setting;

5.3. “Application” displays the current scene mode setting;

5.4. “Version” displays the current ﬁrmware version.

Select “Exit” and press “OK” to return to the root menu