User's Manual

2.Activate the device pairing mode by power on device (some device will be
on pairing mode in 5 seconds after power on). Or user also can activate
pairing mode by press the key of device.
3.Save the device while device is on pairing mode (The pairing command will
be sent to device while save button is pressed)(Picture7, 8).
5
Attention:
a. The device type on Add device menu has to be thesame with device!
b. The following is the definition to activate pairing mode for different device.
Product
LED Driver
No
Yes
Activate pairing mode 5 seconds
automatically after power on
Activate pairing mode 15 seconds by
key
7
Area
7.1
Add area
Click to area menu. And click to add new area(Picture9,10)
Input the area name and select devices for this area.
Area Sub Menu
Click one area can enter the sub menu and all different device can be listed.
User can control each of device in this area(Picture11).
User can move the slider to change color or brightness.
7.2