User's Manual

15
Bluetooth handset pairs
successfully.
2.2 Keypad Description:
1．Switch Key: On the top of mobilephone, press this key for a
moment to turn on or turn off the mobilephone.
2. End Key: It’s used to end calls or reject incoming calls. Press
this key to return to standby status under other conditions.
The description of every key and certain functions above depend
on specific models.
2.3 Battery
Battery under original status can be used afar charging by 50%
power. The full performance of a new battery is achieved only
after the first three complete charge and discharge cycles.
The disassembly and installation of battery
 Please follow steps below to disassemble the battery: ①Open
the back cover of the phone; ②Remove the battery from left;
 Please follow steps below to install the battery: ①Push down
the right end of the battery gently; ②Close the back cover of
the phone.
2.4 Charge for Battery
 Connect the charger with power.
 Insert the end of the charger into the right side of the phone
(Note: the arrowhead shall be upward).
 Then, power indication icon on the screen flashes repeatedly.
If the phone is switched off during charging, there is power
indication image on the screen, which means that the battery
is under charging. If the phone is overused under low battery,
then charging indication icon will be displayed after the