User's Manual

18
 Once you need to remove the SIM card, please switch off the
phone first, disassemble the battery and remove the SIM card
from SIM card holder.
2.6.3 Power On and Power Off
Long press End Key to switch on the phone, and long press End
Key to switch off the phone.
If you switch on the phone and there’s no SIM card, the phone
will prompt you to insert SIM card. The phone will check if the
SIM card is available after SIM card is inserted.
Then, prompts below will appear on the screen on by
one:
Enter PIN1——It appears if you’ve set the password of
SIM card.
Enter phone password ——It appears if you’ve set
password to lock the phone.
Search for network——The phone will search for network till it
finds proper
network.
2.6.4 Unlock of SIM card
SIM card uses PIN1 (personal identity number) code for protection
against unauthorized use. You are required to key in PIN1 code to
unlock the SIM card every time the phone is switched on once your
phone enables this function, then you can make calls or answer
incoming calls. Users can also choose to remove SIM card protection
(please refer to Section 3.10.6 Security Settings); in this case, the
SIM card can’t be protected against unauthorized use.
 Press End Key to switch on the phone.
 Key in PIN1 code, press Right Soft Key to clear incorrect
input and press OK to enter. For example, if PIN1 code is set
as 1234, then you shall key in:
1 2 3 4