User's Manual

12
2.6.2 Insertion and Removal of SIM card
SIM card is placed in a card generally, so please take it out carefully
before installing in the phone.
 Switch off the phone and remove the battery and other external power.
 This phone uses dual-card mode, the place of card A and card B is
decided by options in menu (please refer to “Settings” for “Dual-card
Settings”). Please follow the photo to insert the SIM card to SIM card
holder.
 Once you need to remove the SIM card, please switch off the phone
first, disassemble the battery and remove the SIM card from SIM card
holder.
2.6.3 Power On and Power Off
Long press End Key to switch on the phone, and long press End Key to
switch off the phone.
If you switch on the phone and there’s no SIM card, the phone will
prompt you to insert SIM card. The phone will check if the SIM card is
available after SIM card is inserted.
Then, prompts below will appear on the screen on by one:
Enter PIN1——It appears if you’ve set the password of SIM card.
Enter phone password ——It appears if you’ve set password to
lock the phone.
Search for network——The phone will search for network till it
finds proper network.
2.6.4 Unlock of SIM card
SIM card uses PIN1 (personal identity number) code for protection against
unauthorized use. You are required to key in PIN1 code to unlock the SIM
card every time the phone is switched on once your phone enables this
function, then you can make calls or answer incoming calls. Users can also
choose to remove SIM card protection (please refer to Section 3.10.6
Security Settings); in this case, the SIM card can’t be protected against
unauthorized use.
 Press End Key to switch on the phone.
 Key in PIN1 code, press Right Soft Key to clear incorrect input and
press OK to enter. For example, if PIN1 code is set as 1234, then you
shall key in:
1 2 3 4
If incorrect code is keyed in for three times in succession, SIM card will
be locked. The phone will require you to key in PUK1 code for
unlocking. Please do not key in at random if you don’ know PUK1 code.
You shall send SIM card to network operator for assistance. Please refer
to Section 3.10.6 Security Settings.
Note: Your network supplier will set a standard PIN1 code (4 to 8 digits)