User's Manual

Then, prompts below will appear on the screen on by one:

Enter PIN1——It appears if you’ve set the password of SIM card.

Enter phone password ——It appears if you’ve set password to lock the phone.

Search for network——The phone will search for network till it finds proper network.

2.6.4 Unlock of SIM card

SIM card uses PIN1 (personal identity number) code for protection against unauthorized use. You are required to key in PIN1

code to unlock the SIM card every time the phone is switched on once your phone enables this function, then you can make calls

or answer incoming calls. Users can also choose to remove SIM card protection (please refer to Section 3.10.6 Security Settings);

in this case, the SIM card can’t be protected against unauthorized use.

 Press End Key to switch on the phone.

 Key in PIN1 code, press Right Soft Key to clear incorrect input and press OK to enter. For example, if PIN1 code is set as

1234, then you shall key in:

1 2 3 4

If incorrect code is keyed in for three times in succession, SIM card will be locked. The phone will require you to key in PUK1

code for unlocking. Please do not key in at random if you don’ know PUK1 code. You shall send SIM card to network operator

for assistance. Please refer to Section 3.10.6 Security Settings.

Note: Your network supplier will set a standard PIN1 code (4 to 8 digits) for your SIM card. You shall change the code to your

personal password as soon as possible. Please refer to Section 3.10.6 Security Settings for details.

2.6.5 Unlock of the phone

You can set password protection for your phone against unauthorized use. You are required to key in PIN1 code (if you’ve set

password protection) to unlock the phone every time the phone is switched on once your pone enables this function, then you

can make calls or answer incoming calls. Users can also choose to remove password protection (please refer to Section 3.10.6

Security Settings); in this case, the phone can’t be protected against unauthorized use.

 Key in phone password, press Right Soft Key to clear incorrect input and press OK to enter. For example, if the phone

password is set as 1122, then you shall key in:

1 1 2 2

Please contact your retailer or local authorized maintenance service center to unlock the phone password once you forget it.

2.6.6 Connecting to Network

 The phone will search for available network automatically (Searching for network is displayed on the screen) once the SIM

card is unlocked successfully. Name of network supplier will appear on the screen once the phone searches for available

network.

Note: If EMERGENCY is displayed on the screen, it means that your phone is out of the normal network coverage, but you can

also make emergency calls according to the signal strength.

2.6.7 Dial calls

You’re allowed to make calls or answer incoming calls once name of network supplier appears on the screen. The signal bar in

upper left corner represents the strength of network signal. Moving in a small range can improve your calling quality as the

calling can be interfered by barriers greatly.