User's Manual

12
It’s normal that the battery, phone and charger will be heated slightly during charging.
 Disconnect the mobile phone and charger with AC electrical plug once the battery is fully charged.
Note:
 Always keep the battery in ventilated place with the temperature from ＋5℃ to ＋40℃ during charging, and make sure to
use the charger provided by manufacturer. It may cause danger once unapproved charger is used and it may invalidate any
approval or warranty.
 If the phone switches off automatically or there’s “Low Battery” displayed on the phone, please charge to the battery as quick
as possible. The phone will reduce charging time automatically if the battery power isn’t used up before charging.
 The duration of standby time and duration of talk time offered by manufacturer are based on ideal working environment. In
actual use, however, the working time of battery changes based on network condition, working environment and using way.
g Make sure that the battery is installed properly before charging and it’s forbidden to remove the battery during charging.
g Please disconnect the charger and phone with power once charging is over.
g If you don’t disconnect the charger with power and phone, the phone begins charging again when the power loss reaches
certain extent after overcharging lasts for quite a long time (about 5 – 8 hours). We suggest you don’t do this, as it will
influence the performance and lifetime of the battery
2.6 Connecting to network
2.6.1 SIM card
Make sure that you’ve inserted available SIM card to the phone before your use. SIM card is the key to enter digital GSM
network.
All information related with establishing network connection and calling record initiate are saved in metal area in SIM card.
Meanwhile, there’re other information saved in the SIM card, including name and phone number saved in phone book and SMS.
The SIM card can be removed from your phone and inserted to any GSM phone (the new phone will read SIM card
automatically).
Never touch metal area the SIM card to avoid information loss or damaging the card. Keep SIM card far away from electricity
and magnet. You can’t enter GSM network once the SIM is broken.
Warning: Do switch off the phone before removing SIM card. It’s forbidden to insert or remove SIM card if the phone is
connected to external power, or else, the SIM card will be damaged.
2.6.2 Insertion and Removal of SIM card
SIM card is placed in a card generally, so please take it out carefully before installing in the phone.
 Switch off the phone and remove the battery and other external power.
 This phone uses dual-card mode, the place of card A and card B is decided by options in menu (please refer to “Settings” for
“Dual-card Settings”). Please follow the photo to insert the SIM card to SIM card holder.
 Once you need to remove the SIM card, please switch off the phone first, disassemble the battery and remove the SIM card
from SIM card holder.
2.6.3 Power On and Power Off
Long press End Key to switch on the phone, and long press End Key to switch off the phone.
If you switch on the phone and there’s no SIM card, the phone will prompt you to insert SIM card. The phone will check if the
SIM card is available after SIM card is inserted.