User's Manual

Sharp 340/380 user manual
Figure 4.2.5.1
4.2.6 Web Parameter Configuration Example
Assuming an application scenario, this application scenario requires the reader to
automatically read tags when the reader is turned on, and the custom tag data is transmitted
to the port of the IP address of the designated computer host via UDP at an upload interval
of one second. The parameters that need to be configured are as follows:
Repeat tag upload interval
As shown in Figure 4.2.6.1, set RepeatTime to 100x10ms, then the same tag be read multiple
times in one second but only uploaded once.
Figure 4.2.6.1