HL7202K8 Handheld Terminal User manual Shenzhen Hopeland Technologies co. Ltd.
Welcome to be a customer of Hopeland.
Use this user manual Thank you for choosing Hopeland technology multifunctional handheld terminal. Based on the high technology and high standard of Hopeland technology, this equipment provides you with high quality experience. This user manual is convenient for you to understand the functional features and usage of this product. Please read the instructions first Before use, please read the safety precautions and user manual carefully to ensure safety and normal use.
Contents 1 Specification.......................................................................................................................................................... 1 2 Schematic diagram.............................................................................................................................................. 2 2.1 Structure appearance.............................................................................................................................. 2 2.2 Weight....
HL7202K8handhelduser manual 1 Specification Product parameters Functional Configurations MCU Keypad Indicator LED Basic functions Major parameters ATSAM4S4BA-MU Trigger Key, Power key, Work mode switch key, Charging indicator, reset key status indicator, Work mode indicator V2.1+EDR Connection range of 10m and above Support Audio communication Support buzzer The professional scanning engine module supports one-dimensional barcode and two-dimensional code scanning 2D: PDF417.QR Code, Hanxin .
HL7202K8handhelduser manual 2 Schematic diagram 2.1 Structure appearance Figure 2-1 HL7202K8 Structure appearance HL7202K8 Dimensions 176mm×130.4mm×83.5mm (without accessories) 2.
HL7202K8handhelduser manual 3 Instructions Function diagram Introductions Charging indicator status indicator Display red when charging, full display green Flashing slowly: pairing Constant: connected Flashing fast: battery low Work Mode indicator Off: UHF mode On: Scanning mode In different working modes, press the same trigger button will perform corresponding functions Power button Work mode switch key Press and hold more than 2 seconds to turn on or turn off the device Switch the working mode of
HL7202K8handhelduser manual 4 Demo Software instructions 4.1 Android installation package (apk) At present, handheld demo software version is V1.5.Demo software runs on Android 5.0 system, can be installed using CL7202G7 or CL7202G9. 4.2 connection Take HL7202K8 -096464 as an example: Open the software and check whether HL7202K8 -096464 exists in the parameter list of connection.
HL7202K8handhelduser manual Once the link is successfully connected, it will prompt "open connection successfully" and jump to UHF interface by default. At this point, you can click "version" to check the baseband version of UHF and further confirm that the connection is successful. 4.
HL7202K8handhelduser manual Interfaces of Read tag, write tag, lock tag, configuration Baseband upgrade of UHF module
HL7202K8handhelduser manual When upgrading, you need to hold down the power key Query UHF version
HL7202K8handhelduser manual 4.4 Scan Click the "barcode" icon to enter the scanning test interface. One-dimensional code and two-dimensional code can be scanned respectively, as shown in the figure below: 4.5 Trigger function setting The trigger button of handheld (K8) has the following functions: Press the trigger button to start UHF tag reading test, stop reading immediately after releasing the trigger button. Press and release the trigger button once to do barcode test.
HL7202K8handhelduser manual After confirm, click the "Set" button, and it will prompt that the Setting is successful. At this point, the trigger execution instruction is set to read user data. As shown in the figure below: Open the interface of UHF tag reading, press the trigger button at this time, the handheld starts to read tags, and the interface of tag reading will display the tag data.
HL7202K8handhelduser manual 4.
HL7202K8handhelduser manual 5 Packing accessories and transportation and storage 5.1 Package To facilitate future storage and transportation, the packing boxes and packing materials should be properly stored after opening. In the packing box, besides the handheld, it also includes the accessories for the use of the products. Please confirm that the products and accessories are complete according to the packing list of the products.
HL7202K8handhelduser manual 6 Common failure analysis and solution Can't find another device Make sure the wireless function is enabled. Make sure that the device you want to connect to has wireless function enabled (if necessary). Make sure the distance between the device and another device is within range. Safety precautions To protect you and others from harm or protect your terminal from damage, please read all the information below before using your terminal.
HL7202K8handhelduser manual damage to the battery. Note: Please comply with all safety warnings and regulations when using terminals in restricted areas Close the terminal where it is not allowed Comply with all restrictions on the use of terminals in a particular area. Do not use terminals near other electronic devices Most electronic devices use radio frequency signals, and your terminal may interfere with other electronic devices.
HL7202K8handhelduser manual Overcharging may shorten the battery life. The battery will not discharge gradually after long-term placement and must be recharged before use. Please disconnect the power when the charger is idle.
HL7202K8handhelduser manual 7 After-sale service Letter to Customers Since our aim is to continuously improve our products for better user experience, we may modify the product characteristics, composition and design of circuits without given notifications. Thus the real product may be not in accordance with this manual. Generally, we will provide timely amendments to this manual. If it ’ s not provided timely, please consult our service department. Shenzhen Hopeland Technologies Co., Ltd.
FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
