User's Manual

HL7202K8handhelduser manual
4.4 Scan
Click the "barcode" icon to enter the scanning test interface. One-dimensional code
and two-dimensional code can be scanned respectively, as shown in the figure below:
4.5 Trigger function setting
The trigger button of handheld (K8) has the following functions: Press the trigger
button to start UHF tag reading test, stop reading immediately after releasing the trigger
button. Press and release the trigger button once to do barcode test. The UHF operating
instructions triggered by the trigger button (that is, how to read and what areas of data to
read) is set through the UHF configuration interface. To read tags or scan barcodes, switch
through MODE key of handheld (K8), and use status indicator to distinguish and identify.
Data obtained by trigger button of handheld (K8) can only be displayed by reading
tag interface or barcode interface of demo. Other interfaces do not display the obtained
data.
The following is an example of setting trigger button to read user data:
 Open the uhf configuration interface, select the option of "custom read" in the
drop-down box of trigger execution instruction, and enter the instruction of reading
user data in the pop-up box, as shown in the figure below.